| Connector A: | USB Standard Type A Male |
| Connector B: | Serial DB9 (RS-232) Male |
|
Ship Weight:
|
0.37 lbs |
|
Warranty: |
1 Year |
|
Tariff Code: |
8544.42.20.00 |
The USB 2.0 (Type A) to RS-232 (DB9 Male) CAT5 extender is a low cost hardware solution that will extend your RS-232 (serial / DB-9) using a single standard CAT5/CAT5e/CAT6 networking cable. It provides full-duplex remote access and control of any RS-232 protocol device. The USB to RS-232 CAT5 extender kit consists of a local transmitter and remote receiver. It provides you with a tremendous amount of flexibility in your installation. You can place RS-232 devices in any location you want and control them remotely up to 90 meters (270 feet).
Specifications and Details- Compatible with all RS-232 / Serial protocols
- Connect the HOST computer (Windows or Mac) to the USB 2.0 (or USB 3.0) Type-A port
- Connect the SERIAL device to the DB9 connector
- Extends RS-232 peripherals up to 270Ft (90 meters)
- Fully Compliant with USB specification 1.1 and 2.0
- Supports transfer rate up to 230kbps
- Supports +/-15kV HBM ESD protection
- Bus-powered - no external power supply required for local or remote unit
- Kit contents: 1 pair USB to DB9 Male RS-422 adapter, 1 installation Mini-CD Driver
NOTE: Ensure the driver is installed before operating products. FTDI Chip drivers can be downloaded and setup with Windows OS 2000 or higher. To update drivers, please unload old version, then re-plug devices, the Windows Update will detect and update automatically. (Above requires internet connected). See installation guide on CD for additional details
