|
Lengths Available: |
11/2in, 13/4in, 1in, 21/2in, 23/8in, 2in, 3in, 3/4in, 4in, |
|
Colors Available: |
Black, White,
|
|
Part Numbers this model: |
BA-1037WH, BA-1039WH, BA-1041WH, BA-1031WH, BA-1038WH, BA-1035WH, BA-1043WH, BA-1108WH, BA-1040WH, |
| |
|
|
Sales Category: |
Grommets |
Wire Gauge (AWG): |
Not Specific / Not Applicable |
|
Connector A: |
*Not Applicable* |
Specification: |
|
|
Connector B: |
*Not Applicable* |
Number Ports: |
N/A |
|
Export Tariff Code (HST): |
8544422000 |
Transfer Rate: |
|
|
Feature / Style: |
|
Images Length/Size Shown: |
4 IN |
|
# Positions: |
|
Shielding: |
|
|
Convert From/To: |
|
Type: |
|
|
Organize your cables with professional desk and cabinet cable-pass through grommets. Cut hole to size specified, and either press or glue into place.
Specifications:- Cut-hole Size Required: 4.0".
- Grommet Insert Width: 3.993"
- Grommet Lid Width: 4.3"
- Grommet Depth: 0.622"
- Inside Usable Diameter (Approx): 3.74"
- Size Tolerances May Vary
Important Installation Note: The Grommets are manufactured to be slightly less that the hole size. For example, if we have a grommet advertised at 3.0 inches (example size ONLY), when measured on a caliper, it will measure at approx. 2.973" inches - or approx .027 inches LESS than the hole size of 3 inches. This difference is by design to allow for the grommet to be inserted into the CUT hole size. These grommets after inserted into a cut hole are intended to move freely. If you need a TIGHT fit, a small amount of glue or silicon may be needed.
Please see technical drawing (Product Manual) below for size and shape details.
|
