|
|
|
Your Home Theatre Connectivity Experts |
2 1/2"" CUT-HOLE SIZE Tan Round Wire Management Grommet w/ Removable Lid
 |
|
| Lengths Available: | |||
| Colors Available: | Black, Brown, Brown, Gray, Tan, White, | ||
| Part Numbers this model: | BA-1031T | ||
| Sales Category: | Grommets | Wire Gauge (AWG): | Not Specific / Not Applicable |
| Connector A: | *Not Applicable* | Specification: | |
| Connector B: | *Not Applicable* | Number Ports: | N/A |
| Export Tariff Code (HST): | 3921190000 | Transfer Rate: | |
| Feature / Style: | Images Length/Size Shown: | 2 1/2 IN | |
| # Positions: | Shielding: | ||
| Convert From/To: | Type: | ||
Organize your cables with professional desk and cabinet cable-pass through grommets. Cut hole to size specified, and either press or glue into place.
Specifications:
- Hole Size Required: 2.5".
- Grommet Insert Width: 2.459"
- Grommet Lid Width: 2.972"
- Grommet Depth: Approx 0.625"
- Inside Usable Diameter (Approx): 2.21"
- Size Tolerances May Vary
Important Installation Note: The Grommets are manufactured to be slightly less that the hole size. For example, if we have a grommet advertised at 2.5 inches (example size ONLY), when measured on a caliper, it will measure at approx. 2.459" inches - or approx .04 inches LESS than the hole size of 2 inches. This difference is by design to allow for the grommet to be inserted into the CUT hole size. These grommets after inserted into a cut hole are intended to move freely. If you need a TIGHT fit, a small amount of glue or silicon may be needed.
Please see technical drawing (Product Manual) below for size and shape details.